Epson SC-T7000 series Service Manual page 137

SC-T7000 series/SC-T5000 series/SC-T3000 series
14. Remove the CR SCALE from the hook of the CR Scale Holder.
Right side
CR SCALE
Figure 3-80. Removing the CR SCALE (Right)
15. Remove the CR SCALE from the CR UNIT.
Since the CR SCALE has a specific orientation, install it in the
direction so that you can read the letters L/R correctly from the
front.
Route the CR SCALE through the detection point on the CR
ENCODER on the rear of the CR UNIT when installing it.
DISASSEMBLY & ASSEMBLY
CR Scale Holder
Hook
Disassembly and Assembly Procedure
Side view
Figure 3-81. Removing the CR SCALE
Revision B
CR SCALE
CR ENCODER
Detection point
CR UNIT
137
Confidential