Initial Ink Charge Flag - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

4.9 Initial Ink Charge Flag

This function allows you to set whether or not to execute the Initial Charge when the
printer is turned ON. To execute the Initial Charge, set the flag to ON.
PROCEDURE
1. Turn the printer ON in the Serviceman Mode. Turn the power ON while pressing
[Menu] + [Back] + [OK].
2. Start the Service Program and select
3. Select ON or OFF and click [Run].
4. Turn the printer OFF.
Figure 4-13. [Initial Ink Charge Flag] Screen
ADJUSTMENT
Initial Ink Charge Flag.
Initial Ink Charge Flag
Revision B
233
Confidential