Psh Board - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

3.4.3.6 PSH BOARD

When replacing/removing this part, refer to
A D J U S T M E N T
R E Q U I R E D
Items and the Order by Repaired Part" (p199)
perform the specified operations including required adjustment.
1. Remove the UPPER LEFT COVER.
2. Remove the UPPER SUPPORT R COVER.
3. Remove the PANEL BOARD. (p120)
4. Remove the TOP COVER. (p85)
5. Remove the RIGHT UPPER COVER & RIGHT ROLL COVER.
6. Remove the REAR RIGHT LOWER COVER.
7. Loosen the screw that secures the HDD Fixing Plate.
A) Silver M3x8 S-tite screw with built-in washer: 1 pcs
8. Remove the two screws that secure the HDD Fixing Plate.
B) Silver M3x8 S-tite screw with built-in washer: 2 pcs
9. Disconnect the cables from the connector (CN1, CN5) of the MAIN-B BOARD,
and remove the HDD Fixing Plate.
DISASSEMBLY & ASSEMBLY
"4.1.2 Adjustment
and make sure to
(p100)
(p94)
(p95)
(p99)
Disassembly and Assembly Procedure
MAIN BOARD
CN5
A
Figure 3-48. Removing the HDD Fixing Plate
Revision B
MAIN-B BOARD
CN1
B
HDD Fixing Plate HDD Fixing Plate
B
118
Confidential