Nb6Plus4Wn Rear Panel; System Requirement And Installation - NetComm NB6 User Manual

Solid Green
Off
PPP
Solid Green
Off
Ethernet
Flash Green
1, 2, 3, 4
Solid Green
Off
WLAN Flash Green
Solid Green
Off
WPS
Flash Green

NB6Plus4Wn Rear Panel

The following figure illustrates the rear panel of your ADSL Router
Connector
Reset
Power
Ethernet – 1, 2, 3, 4
Line
WPS Push button configuration for wireless connection

System Requirement and Installation

No PPPoA or PPPoE connection
At least one PPPoA or PPPoE connection is up. The users can access the
No Ethernet signal is detected.
User data is going through Ethernet port
Ethernet interface is ready to work.
No radio signal is detected or WLAN has been disabled.
User data is going through WLAN port
WLAN interface is ready to work.
WPS is pushed and ready for wireless client to connect
Description
Wireless antenna
Reset to factory defaults
12VDC Power connector
Power on/off switch
Ethernet RJ-45 connector
RJ-11 connector (Telephone line)
System Requirement and Installation
ADSL line connection is up.
Internet now.
WPS is off