Dynamic IP: If you apply for an on-demand connection, you will be given an Internet account with
username and password. You will get a dynamic IP issued by your ISP, such as under PPPoA, PPPoE, or
MER mode.
Static IP address: If you apply for full-time connectivity, you may get either one static IP address or a
range of IP addresses from your ISP. The IP address varies according to different ADSL service provider,
such as using IPoA or MER mode.
Overview
Overview
This chapter provides you with a description for the LEDs and connectors on the front and rear surface
of the router. Please take a look at this information, before you use/install this router.
NB6 LED Indicators
The LED Indicators are located on the front of the unit, their meanings are as follows:
Function
Color
Definition
Off
Power is off.
Solid Green
Power is on and the device operates normally.
Power on self-test in progress
Power
Solid Red
The device enters the console mode of the boot loader.
Power on self-test failure if the led always stays solid red.
Flash Red
Firmware upgrades in progress