Ip Over Atm - NetComm NB6 User Manual

You can check the contents on the Summary page.
If you find anything incorrect, click Back to modify the settings.
If everything is OK, click Finish to accept these settings.
Now, the system will reboot to activate the new settings that you have set in this section.
Please wait for 2 minutes before restarting the router.

IP over ATM

If the type you have to choose is IP over ATM, please refer to the following information.
IPoA is an alternative of LAN emulation. It allows TCP/IP network to access ATM network and uses ATM
quality of service's features.
Choose IPoA and click "Next".
None:
If it is not necessary to set the WAN IP address, please click this button.
Obtain an IP address automatically:
Click this button to allow the system to get an IP address automatically.
WAN IP Address & WAN Subnet Mask:
If you choose Use the following IP address, you have to enter the IP address and subnet mask
information received from the ISP for the WAN interface.
Obtain DNS server address automatically:
Only when you select Obtain an IP address automatically that this option is available. You may click this
button to allow the system to get DNS server address automatically.
Use the following DNS server addresses: