Management Control - From Remote - NetComm NB6 User Manual

For the Admin Account, the default setting for both username and password are admin. If you want to
change the username and the password, please modify the User Name and New Password, and then
retype the new password in the Confirm field for confirmation. Then click Apply.
To create a user account, you may setup a username and password under User Account on the same
page.
Note that the new user can merely access the Quick Start and Status page.
Management Control – From Remote
There are various interfaces for the remote access. Please choose from them if you want to enable the
remote access control.
Note: NB6 supports Web Browser, Telnet, TFTP and Ping only
Select the Internet Connect:
Select one connection item from the drop-down list to enable the function.
Web Browser:
Check this box if you want to have remote control through HTTP. The default port number is 8080.
Modify the port whenever you want.
Telnet:
Check this box if you want to have remote control through telnet.
FTP: