Virtual Server - Static Dns; Nat Alg - NetComm NB6 User Manual

Select the interface from the drop-down list that you want to use for connecting the Internet.
User Name / Password:
Enter the user name and password that you registered with the provider.
Host Name. Domain Name:
Key in the domain name or host name that you registered. You can use letters and dash for
naming, yet other characters are not allowed to use for preventing from making troubles.
Status:
It displays current status.
When the setting is finished, click Apply to invoke them, or click Cancel if you want to discard the
settings.
Virtual Server – Static DNS
This page allows you to configure DNS mapping between Domain name and IP address for your local
hosts. In case you want to access the local servers with domain names from the local network, you can
configure the mapping information on the page.
Domain Name:
Key in the domain name that you registered at the provider. You can use letters and dash for
naming, yet other characters are not allowed to use for preventing from making troubles.
IP Address:
Key in the IP address for the domain name to map.
Click Apply to upload your setting.

NAT ALG

Enable VPN ALG