System Log - NetComm NB6 User Manual

The default setting is Manual. Select this one, and set the start time by typing the date and the time
manually to help the router perform tasks.
If you select Time Server, the system will set time via time server automatically.
Primary Time Server/ Secondary Time Server:
You may select the preferred time server from the drop-down list. The time will be adjusted by the
time server.
Time Zone:
Choose the time zone of your location.
Apply:
Save the data on the screen and apply the data after restarting the router.
Cancel:
Discard the new configuration and reserve the original settings.

System Log

As shown on the web page, you can view the system log and configure system log whenever you want.
To view the system log, you must configure system log first. Press Configure System Log to start.
Configuring System Log
You can enable or disable the log function, and choose log level, display level and proper mode as you
like. Then click Apply to invoke the settings or press Cancel to discard them.
There are 8 types of log level and display level for you to choose.