Quality Of Service - Ip Qos - NetComm NB6 User Manual

IP Precedence:
The number you choose here decides the type of the IP address processed. No change is the default
setting.
IP type of Service:
The system provides some types of service for you to choose. The meaning of each type is the same as
the denotation. The default one is No change.
If you set the LAN 802.1p Priority 0 as the traffic condition, choose Low traffic priority for this rule, and
set IP Precedence, IP type of service, and WAN 802.1p as no change, after clicking Apply, you will get
the result as the figure in the right column.
Thus when the users' data matches the traffic condition, the transmission will get a low traffic priority.
You may check the Delete box and press Delete to discard it, or click Add to create more.
Quality of Service – IP QoS
To classify the upstream traffic by assigning the transmission priority of the data for different users,
please use IP QoS to prioritize the data transmission.
The IP QoS allows you to set the settings based on layer three IP packets.
To add a new IP QoS setting, press Add in the page of Quality of Service – IP QoS, the below page will
appear.