Enabling Wpa-Psk Authentication And Security - NetComm NB6 User Manual
Netcomm gateway series adsl2+ modem routers yml854rev2
Hide thumbs
Also See for NB6:
- User manual (152 pages) ,
- Quick start manual (13 pages) ,
- Specification sheet (2 pages)
Table of Contents
Advertisement
13.
Click OK three times to close the dialogs and save all the settings until return to Network
Connections.
14.
Now the configuration for WPA authentication is completed. And you may start to use the
wireless device.
Enabling WPA-PSK Authentication and Security
1.
Click the Start button, select Control Panel, then Network Connections.
2.
Right click on your wireless network card and select Properties. Click on the "Wireless
Networks tab".
3.
Click Add to continue.
4.
Select the Association Tab, and enter the SSID of the AP. (e.g., Please)
5.
Choose WPA-PSK for the Network Authentication and TKIP for Data encryption.
6.
Enter Network key twice to access the AP.
7.
Click OK to save the settings and return to the Wireless Networks tab on Wireless Properties.
Advertisement
Table of Contents
Troubleshooting
