Rear Panel View; Hardware Load Default - NetComm NB750 User Manual

1.2.2 Rear Panel View

FG:
DC 5V:
WAN:
LAN:
Factory Reset:

1.2.3 Hardware Load Default

If you need to reset the NB750 to factory default values or load the latest configuration file, please
follow the description step by step to load the factory default settings or latest configuration file for
the device. Please be careful. Do not press the Factory Reset button unless you want to clear the
current data.
1. Plug in the power cord and then hold down the Factory Reset button for 2 seconds.
2. Release the Factory Reset button.
3. The NB750 will load the default settings or latest configuration file and complete a self-
test.
4. This completes the reset procedure.
NB750 Load Balancing Router User Guide
YML817 Rev1
Ground connection.
Connecting to AC adapter.
The NB750 provides two RJ45 type WAN ports for
connection to broadband transmission equipments
such as ADSL or CABLE Modem via a RJ45 cable.
The NB750 provides one RJ45 type LAN port for
connection to your network devices such as Hub/
Switch via the RJ45 cable. Using a HUB/Switch will
allow more PCs to connect with the NB750.
Should the NB750 incur a system crash, press the
Factory Reset button to reload the factory default
value or reset it back to the latest configuration file.
7