Ppp Over Atm (Pppoa) Ip Extension Mode; Ppp Over Ethernet (Pppoe) Mode - NetComm NB6 User Manual
Netcomm gateway series adsl2+ modem routers yml854rev2
Hide thumbs
Also See for NB6:
- User manual (152 pages) ,
- Quick start manual (13 pages) ,
- Specification sheet (2 pages)
Table of Contents
Advertisement
Check DHCP Server on box. And key in the start and end IP address, e.g.:
Start IP Address: 192.168.1.2
End IP Address: 192.168.1.254
Then enter the leased time (the default is 1 day), and click Next.
7.
Check the network information on This Internet Connection -- Summary page. Make sure the
settings match the information provided by your ISP. Click Finish.
PPP over ATM (PPPoA) IP Extension Mode
Description:
In this deployment environment, the PPPoA session is between the ADSL WAN interface and BRAS. The
ADSL Router acts as a bridge and receives a public IP address from BRAS for your computer. And only
the one that bears the public IP address is allowed to access the Internet. Moreover, no NAT
translation will be done at this case.
Configuration:
1.
Start your browser and type 192.168.1.1 in the URL box to access ADSL web-based manager.
2.
Go to Advanced – Internet – Connections. And click Add.
3.
Key in the VCI and VPI value, e.g.:
•
VPI – 8
•
VCI – 35
Click the Next button.
4.
On the Configure Internet Connection – Connection Type page, select PPP over ATM (PPPoA)
then click the Next button.
5.
On the WAN IP Settings page, select Obtain an IP address automatically, check PPP IP
extension (and Enable NAT would become disabled automatically) then click "Next".
6.
On the PPP Username and Password page, enter the PPP username and password offered by
your ISP. Select "Always on" and then click "Next".
7.
Check the network information on This Internet Connection -- Summary page. Make sure the
settings match the settings provided by the ISP. Click Apply.
8.
Press Finish.
PPP over Ethernet (PPPoE) Mode
Description:
In this deployment environment, the PPPoE session is between the ADSL WAN interface and BRAS. The
ADSL Router gets a public IP address from BRAS when connecting to DSLAM. The multiple client PCs
will get private IP address from the DHCP server enabled on private LAN. The enabled NAT mechanism
will translate the IP information for clients to access the Internet.
Configuration:
1.
Start your browser and type 192.168.1.1 in the URL box to access ADSL web-based manager.
2.
Go to Quick Start – Quick Setup. Uncheck Auto Scan Internet Connection (PVC). Key in the VCI
and VPI value, e.g.:
Advertisement
Table of Contents
Troubleshooting
