Failure to connect ALL non-ADSL equipment via a microfilter may result in loss of the data link
whenever a call is made or answered. In many cases the link will also be lost when a call is received
even if it is not answered.
Choosing a place for the ADSL Router
•
Place the ADSL Router close to ADSL wall outlet and power outlet for the cable to reach
it easily.
•
Avoid placing the device in places where people may walk on the cables. Also keep it
away from direct sunlight or heat sources.
•
Place the device on a flat and stable stand.
Connecting the ADSL Router (Ethernet)
Follow the steps below to connect the related devices.
•
Connecting the ADSL line. Connect the Line port of the device to your ADSL wall outlet
with RJ-11 cable.
•
Please attach one end of the Ethernet cable with RJ-45 connector to the LAN port of
your ADSL Router.
•
Connect the other end of the cable to the Ethernet port of the client PC.
•
Connect the supplied power adapter to the Power port of your ADSL Router, and plug
the other end to a power outlet.
•
Turn on the power switch.