To add a new Inbound IP Filtering, click Inbound traffic in the item of Select the direction to filter
packets on the IP Filtering page. Use the same way to add a new one as stated above.
Quality of Service
QoS (Quality of Service) is an industry-wide initiative to provide preferential treatment to certain
subsets of data, enabling that data to traverse the Internet or intranet with higher quality transmission
service.
Quality of Service – Bridge QoS
To classify the upstream traffic by assigning the transmission priority for different users' data, please
use Bridge QoS to prioritize the data transmission.
The Bridge QoS allows you to set the settings based on layer two bridge packets.
Traffic Class Name:
Key in a name as the traffic class for identification.
802.1p Priority:
Each incoming packet will be mapped to a specific priority level, so that these levels may be acted on
individually to deliver traffic differentiation. Please choose the number (from 0 to 7, low to high
priority) for the 802.1p Priority.
Traffic Priority:
There are three options – Low, Medium, and High that you can choose.