Mer - NetComm NB6 User Manual

4. On the Configure Internet Connection – Connection Type page, select Bridging then click the
Next button.
5. On the WAN IP Settings page, select "None" for WAN IP address settings.
6. On the Configure LAN side Settings page, enter the IP address and subnet mask for your LAN,
e.g.:
Primary IP address: 192.168.1.1
Subnet Mask: 255.255.255.0
Choose DHCP Server Off and click "Next".
7. Check the network information on the Summary page. Make sure the contents match the
settings provided by your ISP. Click Finish.
8. Refer to the TCP/IP properties, specify an IP Address, and fill in other information needed,
e.g.:
IP Address: 10.11.86.81
Subnet Mask: 255.255.255.248
Gateway: 10.11.86.1
Preferred DNS server: 168.95.1.1
9. Click OK. Now the router is correctly configured. You can access to the Internet.

MER

Description:
In this deployment environment, we make up a private IP network of 192.168.1.1. NAT function is
enabled to support multiple clients to access to Internet.
In this example, the ADSL Router acts as a NAT device which translates a private IP address into a
public address. Therefore multiple users can share with one public IP address to access the Internet
through this router. The public address can be a static public address that is pre-assigned by ISP or a
dynamic public address that is assigned by the ISP DHCP server.
Configuration:
1. Start your browser and type 192.168.1.1 in the URL box to access ADSL web-based manager.
2. Go to Quick Start – Quick Setup. Uncheck Auto Scan Internet Connection (PVC). Key in the VCI
and VPI value, e.g.,
•
VPI – 8
•
VCI – 35
Then click the Next button.
3. On the Configure Internet Connection – Connection Type page, select Bridging and then click
the Next button.
4. On the WAN IP Settings page, select "Obtain an IP address automatically"; then, select Obtain
DNS server address automatically.
5. Check Enable NAT. Then click "Next".