Rear Panel - NetComm G.SHDSL 4-port Security Modem Routers NB712 User Manual

4.2

Rear Panel

The rear panel of the SHDSL router is where all of the cable connections are made.
Connectors
DC-IN
LAN (1,2,3,4)
CONSOLE
LINE
RST
The reset button can be used in one of two ways.
(1) Press the Reset Button for one second to reboot the system only.
(2) Pressing the Reset Button for four seconds will cause the product to reload the factory default
settings, thereby losing all of your settings. If you forget your user name or password, or if the router
is having difficulties connecting to the Internet, you may want to reconfigure it to clear all previous
settings. Press the Reset Button and hold for four (4) seconds with a paper clip or sharp pen/pencil.
NB712 / NB714 User Guide
YML829 Rev1
Description
Power adaptor inlet: Input voltage 9VDC
10/100BaseT auto-sensing and auto- MDIX for LAN port
(RJ-45)
RS-232C (DB9) for system configuration and maintenance
SHDSL interface for WAN port (RJ-11)
Reset button to reboot or load factory default
15