NetComm NB6 User Manual page 85

To set the basic configuration for the wireless features, please open the Basic page from the Wireless
menu.
Wireless Interface
The number of the wireless interface. The NB6Plus4W supports up to four interfaces.
Network Name (SSID)
The system will detect the SSID of your router and it will be displayed in this field for your reference.
The SSID is the identification characters of a router. The default words will be shown on this page. If
you do not check "Hidden SSID", the router will periodically broadcast its SSID to allow wireless clients
within range to recognize its presence. This can create a security hole since any wireless clients that
receive the broadcast may be able to gain unauthorised access to your network.
Please note that if you want to communicate, all wireless clients should use the same SSID with the
router or access point.
Hide Network
Check this box to hide the SSID of this AP (access point). Then other people in the area cannot find the
SSID of this device.
Transmission Mode:
This section configures the data transmission mode. If desired, you can choose from the drop down
menu to limit the NB6Plus4Wn to certain Data modes.
802.11b/g/n or 802.11b/g mixed mode:
Channel Width:
This is the range of frequencies that will be used.
Primary Channel:
This selects the second channel to be used when the channel bandwidth is 40MHz.