NetComm NB6 User Manual page 115

8. The Enable network access control using IEEE 802.1X is selected by default, and Protected
EAP (PEAP) is selected from the EAP type.
9. Click Properties under EAP type.
10. Choose Use a certificate on this computer option and select Use simple certificate selection
(Recommended).
11. Check the Validate server certificate check box if server certificate validation is required
12. In the Trusted Root Certification Authorities field, check the check box beside the name of the
certificate authority from which the server certificate was downloaded. (e.g.,
NetComm.savd.tw)
Note that if you leave all check boxes unchecked, you will be prompted to accept a connection to the
root certification authority during the authentication process.