Numbered Ip Over Atm (Ipoa)+Nat - NetComm NB6 User Manual

6. Check Configure the second IP Address and Subnet Mask for LAN Interface and enter the
information needed.
Secondary IP Address: 10.11.80.81
Subnet mask: 255.255.255.248
Click Next.
7. Check the network information on the Summary page. Make sure the settings match the
settings provided by your ISP. Click Finish.
8. Refer to the TCP/IP properties, specify an IP Address, and fill in other information needed,
e.g.:
IP Address: 10.11.80.82
Subnet Mask: 255.255.255.248
Gateway: 10.11.80.81
Preferred DNS server: 168.95.1.1
9. Now the router is correctly configured. You can access the Internet.
Numbered IP over ATM (IPoA) +NAT
Description:
In this deployment environment, we make up a private IP network of 192.168.1.1. NAT function is
enabled (on ADSL Router or use another NAT box connected to hub) to support multiple clients to
access the Router and some public servers (WWW, FTP).
If you apply for multiple IP addresses from your ISP, you can assign these public IP addresses to the
ADSL Router and public server, e.g., Web or FTP server. Typically the first IP is network address, the
second is used as router IP address and the last one is subnet broadcasting. Other remaining IP
addresses can be assigned to PCs on the LAN.
The following example uses the IP address ranging from 10.11.80.81 to 10.11.80.86 and the subnet
mask is 255.255.255.248.
Configuration:
1. Start your browser and type 192.168.1.1 in the URL box to access ADSL web-based manager.
2. Go to Quick Start – Quick Setup. Uncheck Auto Scan Internet Connection (PVC). Key in the VCI
and VPI value, e.g.:
•
VPI – 8
•
VCI – 35
Click the Next button.
3. On the Configure Internet Connection – Connection Type page, select IP over ATM (IPoA)
then click "Next".
4. On the WAN IP Settings page, select Use the following IP address and Use the following DNS
Server Address, then key in the information that your ISP offered, e.g.: