Numbered Ip Over Atm - NetComm NB6 User Manual

6. On the PPP Username and Password page, enter the PPP username and password offered by
your ISP. Select "Always on" and then click "Next".
7. Check the network information on This Internet Connection -- Summary page. Make sure the
settings match the settings provided by the ISP. Click Apply.
8. Press Finish.
Numbered IP over ATM (IPoA)
Description:
If you apply for multiple IP addresses from your ISP, you can assign these public IP addresses to the
ADSL Router and public server, e.g., Web or FTP server. Typically the first IP is network address, the
second is used as router IP address and the last one is for subnet broadcasting. Other remaining IP
addresses can be assigned to PCs on the LAN. The following example uses the LAN IP address ranging
from 10.11.80.81 to 10.11.80.86 and the subnet mask for LAN is 255.255.255.248. The WAN IP address
is 10.11.95.233, and the subnet mask for WAN is 255.255.255.248.
Configuration:
1. Start your browser and type 192.168.1.1 in the URL box to access ADSL web-based manager.
2. Go to Quick Start – Quick Setup. Uncheck Auto Scan Internet Connection (PVC). Key in the VCI
and VPI value, e.g.:
•
VPI – 8
•
VCI – 35
Click the Next button.
3. On the Configure Internet Connection – Connection Type page, select IP over ATM (IPoA)
then click "Next".
4. On the WAN IP Settings page, select Use the following IP address and Use the following DNS
Server Address, then key in the information that your ISP offered, e.g.:
WAN IP Address: 10.11.95.233
WAN Subnet Mask: 255.255.255.248
Primary DNS server: 168.95.1.1
Secondary DNS server: 168.95.192.1
Uncheck Enable NAT and click "Next".
5. On the Configure LAN side Settings page, key in the information for your LAN, e.g.,
Primary IP Address: 192.168.1.1
Subnet mask: 255.255.255.0
Start IP Address: 192.168.1.2
End IP Address: 192.168.1.254