For Windows Me; For Windows Nt - NetComm NB6 User Manual

1. Open the Start menu, point to Settings and click on Control Panel.
2. Double-click the Network icon.
3. The Network window appears. On the Configuration tab, check out the list of installed
network components.
Option 1: If there is no TCP/IP protocol, click Add.
Option 2: If you have TCP/IP protocol, skip to Step 6.
4. Highlight Protocol and click Add.
5. Highlight Microsoft on the left side of the window, and select TCP/IP on the right side. Then
click OK.
6. When returning to the Network window, highlight TCP/IP protocol for your NIC and click
Properties.
7. On the IP Address tab: Enable Obtain an IP address automatically and click OK.
8. When returning to the Network window, click OK
9. Wait for Windows when copying files.
10. When prompted with System Settings Change dialog box, click Yes to restart your computer.

For Windows ME

1. Open the Start menu, point to Settings and click on Control Panel.
2. Double-click the Network icon.
3. The Network window appears. On the Configuration tab, check out the list of installed
network components.
Option 1: If there is no TCP/IP protocol, click Add.
Option 2: If you have TCP/IP protocol, skip to Step 6.
4. Highlight Protocol and click Add.
5. Highlight Microsoft on the left side of the windows, and select TCP/IP on the right side. Then
click OK.
6. While returning to Network window, highlight TCP/IP protocol for your NIC and click
Properties.
7. On IP Address tab: Enable Obtain an IP address automatically and click OK.
8. While returning to the Network window, click OK.
9. Wait for Windows when copying files.
10. When prompted with the System Settings Change dialog box, click Yes to restart your
computer.

For Windows NT

1. Click Start, point to Settings, and then click Control Panel.
2. Double-click the Network icon.
3. The Network window appears. On the Protocols tab, check out the list of installed network
components.
Option 1: If there is no TCP/IP Protocol, click Add.