NetComm NB6 User Manual page 86

Channel:
The frequency in which the radio links are about to be established. Select one channel that you want
from the drop down list.
As an administrator of the network, one must search which channels are available and then assign one
available channel as the communication channel. All the other clients that match the SSID and pass
security authentication can access this device and will use the same channel that you set here.
Transmission Rate:
This section allows you to specify the data transmission rate. Make a selection by choosing an option
from the drop-down menu.
802.11b only:
802.11g only:
802.11n only:
Multicast Rate:
When the multicast transmitting traffics are large, the transmission will be delayed in some way. If you
want to speed up the rate, modify from the drop-down list.
For example, you may select 802.11g only as the transmission mode, and select high multicast rate like
54 Mbps.
Turbo Mode: