For Windows Xp/Vista/7 - NetComm NB6 User Manual

•
An InstallShield Wizard will appear. Please wait for a moment.
•
When the welcome screen appears, click "Next" for the next step.
•
When the complete window of the InstallShield Wizard appears, click Finish.
•
Link your router and the PC with a USB cable.
•
The system will detect the USB driver automatically, and then copy the proper files for
the router.
Note: If the USB device is not detected automatically, check the USB cable between the PC and the
device. Besides, make sure that the device is power on.
•
When the file copying is finished, the dialog above will close. Now the USB driver is
installed properly. You can use the router.
To make sure that your router is properly installed, please do the following steps.
•
Right-click on My Computer and press Properties.
•
On the Hardware tab, click Device Manager.
•
Confirm that the NetComm NB6 Series ADSL Router USB Remote NDIS Device is on the
Network adapters list.

For Windows XP/Vista/7

•
Run the USB installation program from the CD provided in your router package.
•
An InstallShield Wizard will appear. Please wait for a moment.
•
(Vista only) When the User Account Control windows appears, click Continue
•
When the welcome screen appears, click "Next" for the next step.
•
When the finish installing message of InstallShield Wizard appears, click Finish.
•
Link your router and the PC with a USB cable.
•
The system will detect the USB driver automatically.
Note: If the USB device is not detected, check the USB cable between the PC and the device. Also
make sure that the device is power on.