Reset Router; Upnp For Xp; Panel - NetComm NB6 User Manual

If you have to or want to update the firmware for this router, you can open the Update Firmware web
page and choose the correct file by pressing Browse. Then click the Update Firmware button. The
system will execute the update procedure automatically. When it is finished, the system will tell you
the update is successfully.
Note: Latest firmware update can be found at www.netcomm.com.au.
Note: Router must not turn off during firmware updates.

Reset Router

To make the settings that you set for this router take effect, please open the Reset Router web page
and click the Reboot button to invoke all settings.
You can restore your web pages with default settings. Simply check Reset to factory default settings
and click Reboot.

UPnP for XP

Universal plug and play (UPnP) is architecture for pervasive peer to peer network connectivity of
intelligent appliances and PCs of all form factors. It is designed to bring easy-to-use, flexible, standards-
based connectivity to ad-hoc or unmanaged networks whether in the home, in a small business, public
places, or attached to the Internet.
Only Windows XP supports UPnP function.
Please follow the steps below for installing UPnP components.
1. Click on the Start menu, point to Settings and click on Control Panel.
2. Select Add or Remove Programs > Add/Remove Windows Components to open Windows
Components Wizard dialog box.