Usb Driver Installation; For Windows Me; For Windows 2000 - NetComm NB6 User Manual

USB Driver Installation (USB is not available for NB6Plus4 or NB6Plus4Wn)
If the ADSL router is to be connected to a PC through the USB interface, you will need to install the USB
drivers prior to plugging the USB cable to the PC. Refer to the relevant operating system below to
install the USB drivers.
Note: Do not connect the USB cable until you are prompted to in the instructions below

For Windows ME

•
Run the USB installation program from the CD provided in your router package.
•
An InstallShield Wizard will appear. Please wait for a moment.
•
When the welcome screen appears, click "Next" for the next step.
•
When the complete window of the InstallShield Wizard appears, click Finish.
•
Link your router and the PC with a USB cable.
•
The system will detect the USB driver automatically. Then, the system will copy the
proper files for the router.
Note: If the USB device is not detected automatically, check the USB cable between the PC and the
device. Besides, verify that the device is power on.
•
When the file copying finished, the dialog above will close. Now the USB driver is
installed properly. You can use the router.

For Windows 2000

•
Run the USB installation program from the CD provided in your router package.
* Model shown is NB6 may vary slightly from image