Enabling Wpa Authentication And Security - NetComm NB6 User Manual

14. Click OK twice to close the dialogs until return to Wireless Networks tab of wireless
properties. Now we can see the wireless network which we have just set up being displayed
on the Preferred networks.
15. Click OK to save your settings. The configuration is complete.

Enabling WPA Authentication and Security

The first four steps are the same as the setting for 802.1x authentication, please refer to the previous
part.
5. Select the Association Tab, and enter the SSID of the AP. (e.g., Please)
6. Choose WPA from the drop down menu for the Network Authentication and TKIP for Data
encryption.
7. Click OK, and then select the Authentication Tab.