NetComm NB6 User Manual page 101

System Log Configuration
1. Choose Enabled Log.
2. Select Debugging as the Log Level, and Error as the Display Level. (Or select other level
according to your needs.)
3. Set the Mode as Both, key in the Server IP Address as 10.11.95.2, and leave the Server UDP
Port as the default value 514.
4. Press Apply to invoke the settings.
Viewing System Log – Remote Side (Server)
To view the system log on the Log Server (10.11.95.2), a log viewing tool must be installed.
1. Download the Kiwi Syslog Daemon from Kiwi Enterprises.
(http://www.kiwisyslog.com/downloads.php)
2. Kiwi Syslog Daemon is a freeware Syslog Daemon for Windows. It receives, logs, displays and
forwards Syslog messages from hosts such as routers, switches, and any other syslog enabled
device. You can choose other logger tools; here, we use Kiwi for example.
3. Install the Kiwi Syslog server software on the PC (10.11.95.2).
4. Open the Kiwi Syslog Daemon application. You will get to a screen shown as follows.
The Date and Time record the logging time. The Priority field shows the log level, the Hostname
exhibits the position of the host, and the Message column displays the process the description of it
before the colon is the name of the process and after the colon is the elaboration for that process.