Interfaces; Rear - NetComm NF10W User Manual

Interfaces

Rear

The following interfaces are available on the NF10W:
NUMBER
1 Power supply jack
2 Power button
3 Reset button
4 USB 2
5 Ethernet 1 - 4
6 WAN
7 DSL
www.netcommwireless.com
v1.1
1
3
5
6
7
6
INTERFACE
Connection point for the included power adapter. Connect the power supply here.
Press this button to turn the NF10W on or off.
Reset unit to Default by holding the Reset button down for 3 seconds.
Connect an external USB hard drive here to use the NAS feature of the NF10W.
Fast Ethernet LAN ports. Connect your Ethernet based devices to one of these ports for high-
speed internet access.
Gigabit capable WAN port for connection to a WAN network.
Use the provided RJ-11 cable to connect the router to the telephone line operating your xDSL
service.
2
4
6
6
DESCRIPTION
NetComm Wireless NF10W User Guide
10