NetComm NB6 User Manual page 67

Click this button to forward packets to the specific gateway. Key in the gateway IP address that you
want to use.
WAN Interface:
Click this button to forward packets to a specific WAN interface. Choose one from the drop-down
menu.
E.g., type 192.168.1.1 in the field of the gateway IP address and leave the destination network blank.
Click Apply to view the routing result.
Remove Static Route
If you don't want the static route that you created, please click the icon in the Delete column from the
table.
A dialog window will appear to confirm your action. Click OK to remove the static route, or click Cancel
to keep the setting.
Example – Static Route
Here provides you an example of Static Route.
For the LAN shown above, if the PC in the subnet of 192.168.1.x wants to access the PC in the
subnet of 192.168.10.x, we can set a static route in the ADSL router, in which the destination
is the PC in the subnet 192.168.10.x and the gateway is router B. The setting would be as
follows:
Destination: 192.168.10.0
Netmask: 255.255.255.0 (Standard Class C)