Setting Of Ccrp/Antenna/Gps Antenna Position (Ccrp Setting) - JRC JMA-5212-4/6 User Manual

7.1.6 Setting of CCRP/Antenna/GPS Antenna Position (CCRP Setting)

Set the own ship's CCRP location, radar antenna installation location, and GPS installation location.
GPS : Up to 4 locations can be inputted (select one through the receiving port setting when using the
GPS).
Radar antenna : 1 location can be inputted (one master and one slave).
CCRP : 1 location can be inputted (another location is reserved as an antenna location).
Procedure 1
2
3
4
5
6
7
8
9
Measure the CCRP, radar antenna, and
GPS antenna positions beforehand.
Hold down [RADAR MENU] key.
The Code Input Menu will appear.
Press [0] key.
Move the cursor onto the "ENT" button
in the Code Input menu, and press
[ENT] key.
The Adjust Menu will appear.
Press the following keys.
7 Hull Display Setting
1 CCRP Setting
Input the vessel length in the Length field and the vessel width in the
Beam field at the top right corner of the CCRP Setting screen.
Move the cursor to the X and Y values of CCRP1. Press the ENT key
and input the CCRP1 position.
CCRP is on the starboard side of the ship when X>0 and is on the port side of the ship
when X<0.
In the same manner, input the GPS antenna and radar antenna positions.
Press [0] key and exit the CCRP setting screen.
7 9