Adjustment Of Target Tracking Function (Tt) - JRC JMA-5212-4/6 User Manual

Hide thumbs Also See for JMA-5212-4/6:

Table of Contents

7.4.2 Adjustment of Target Tracking Function (TT)

Optimal values have been set for Video Level and

Vector Constant; therefore, never change their values

unless absolutely necessary. Failure to comply may

result in accidents that would lower target tracking

performance.

[I] Vector Constant Adjustment (Vector Constant)

Adjust the vector follow-up performance of the target tracking function.

The vector constant is adjusted to an optimal value, so do not change it carelessly.

z Do not change the set value carelessly.

The vector constant shall be set to 4 normally. If the

vector constant value is higher, a target's vector will

be better followed up when the target and own ship

change their course or speed, but the vector

accuracy will be lower on the contrary.