JRC JMA-5212-4/6 User Manual page 190

[2] Cursor Length
x Set the length of the cross cursor mark on the radar display.
SHORT : Cuts the cross cursor mark in length.
LONG :
[3] Cursor Pattern
x The type of the cross cursor mark displayed of the display is selected.
: Type 1 is selected for the cross cursor mark 1 displayed in the radar display.
: Type 2 is selected for the cross cursor mark 2 displayed in the radar display.
: Type 3 is selected for the cross cursor mark 1 displayed in the radar display.
: Type 4 is selected for the cross cursor mark 2 displayed in the radar display.
[4] Distance Unit Simultaneity
x Synchronizes the cursor range unit with the VRM1/VRM2 range unit.
ON:
OFF: The range units are not synchronized between the cursor and VRM1/VRM2. A
Makes the cross cursor mark twice as long as when SHORT is selected.
The range units are synchronized between the cursor and VRM1/VRM2. A range
unit cannot be selected individually for the cursor or VRM1/VRM2, and the same
range unit is selected for all of them.
range unit can be selected individually for the cursor and VRM1/VRM2.
3 111