Range Adjustment - JRC JMA-5212-4/6 User Manual

7.1.4 Range Adjustment

Adjust the range so that the range of the target on the radar video is indicated correctly.
Procedure 1
2
3
4
5
6
7
8
9
Exit 1
Search the radar display for a target of
which range is already known.
Hold down [RADAR MENU] key.
The Code Input Menu will appear.
Press [0] key.
Move the cursor onto the "ENT" button
in the Code Input menu, and press
[ENT] key.
The Adjust Menu will appear.
Press [1] key.
Equipment Setup menu opens.
Press [1] key.
The Code Input Menu will appear.
Press [2] key.
The Code Input Menu will appear.
Using numeric pad, enter the value and then press "ENT" button, and
press "EXIT" button to determine the value.
The multi-function control can also be used to enter the value.
Repeat step 4, and adjust until the target range measured in step 1 and
the range on the radar display become identical.
Press [RADAR MENU] key.
The Main Menu will reappear.
7 7