Software Buttons For Area 3 (Top-Right Corner Of The Radar Display) - JRC JMA-5212-4/6 User Manual

2.3.3 Software Buttons for Area 3 (Top-Right Corner of the Radar Display)

10
Cursor mode switching
The mode of the function that uses the cursor is
switched whenever this button is pressed.
AUTO Ÿ ACQ TT Ÿ ACT AIS Ÿ
TGT DATA Ÿ CNCL TT Ÿ
DEACT AIS Ÿ CNCL Data Ÿ
(Mark) Ÿ -------- (Line) Ÿ
Property Ÿ AUTO
Cursor mode: mark font / line
pattern switching
The currently selected cursor mode is indicated.
When the cursor is in the mark or line mode, use
this button to change the mark font pattern or line
pattern. If this button is clicked while the cursor
mode is (mark) or
mark font / line pattern is changed.
Mark color / line color switching
This function switches a mark color / line color. If
this button is clicked while the cursor mode is
(mark) or -------- (line), the mark color /
line color is changed.
Cursor bearing numeric value
display true / relative switching
The bearing numeric value display
bearing) / R (relative bearing) of the cursor is
switched whenever this button is clicked.
2.3 FUNCTIONS OF SOFTWARE BUTTONS
(
Cursor
True 089.6
5.37 NM
EBL1
020
030
EBL2 T
040
-------- (line), the
T (true
2 12
)
Off C
35 33.037' N
140 01.597'E
T 045.0
3.00
VRM1 NM
135.0
VRM2 6.00 NM
PC C
CCRP1
050
  and
EBL1 / 2 and VRM1 /
2 adjustment
These functions set the
EBL2 , and VRM2 displays to On / Off and
acquire the operation right.
If the button is clicked on, the operation right is
acquired. Make adjustments by moving the track
ball to the left and right
adjustment by pressing the [ENT] key.
and EBL1, EBL2 numeric value
true / relative switching
The EBL1 / 2 bearing numeric value display
(true bearing) / R
switched whenever the button is clicked.
If the button is clicked for 2 seconds, the EBL /
Cursor Setting menu is displayed.
y y
2
EBL1 , VRM1 ,
Determine the
T
(relative bearing) is