JRC JMA-5212-4/6 User Manual page 464

(3) Plotter (Option NDB-44) (Synthesis mode)
Projection:
Scale:
Own ship trail:
Cursor mark:
Event mark:
Line:
Coast line data:
Painting out:
External memory:
Destination and sea route:
Mercator projection (Latitude 85 degree or less.)
1/1,000 to 1/10,000,000 are continuously selected.
10 stage can be changed (Preset can be used)
Color of 7 stages.
Interval of storage: 3/5/10/30 sec, 1/3/5/10/30/60 min or
every 0.1/0.2/0.3/0.5/1/3/5/10 nm and OFF
Storage capacity of own ship trail: 7,000 point
Color of 7 stages
Storage capacity of cursor mark: 20,000 point
Variety of cursor Mark: 19
Color of 7 stages
Storage capacity of event mark: Include in cursor mark
Variety of event mark: 3 kinds, (Two kinds can be switched.
/8 form to selection.)
Variety of external event mark: One kind, Monochrome
Color of 7 stage
Storage capacity of line: Include in cursor mark
Variety of line: Solid line, broken line, alternate long and
short dash line
Coast line ROM card (Option)(ERC, JRC, C-Map NT+)
Selected one isoline can be displayed.
ON/OFF can be selected.
Memory card (Option)
Own ship trail, another ship trail, cursor mark, event mark,
line, destination, sea route can be memorized.
Destination can be set up to 99 point.
Information of destination: Azimuth, distance and the time
to required destination.
Setting of sea route: 10 sea routes. (10 destination for one
sea route can be set.)
Alarm of sea route: Destination, Secession, Invetion,
Secession
11 11