8.3.2 Line Monitor - JRC JMA-5212-4/6 User Manual

8.3.2 Line Monitor

Serial communication data can be seen on the built-in Line monitor.
Line monitor can be used to make sure that the serial data are received properly.
Procedure 1
2
3
4
5
6
Exit 1
2
Hold down [RADAR MENU] key.
The Code Input Menu will appear.
Press [0] key.
Move the cursor onto the "ENT" button
in the Code Input menu, and press
[ENT] key.
The Adjust Menu will appear.
Press [5] key.
The COM Port Setting Menu will appear.
Press [7] key.
The LINE MONITOR menu will appear.
Select the Communication port you want to see, pressing the numeric
keys [1] to [8].
The LINE MONITOR appears.
Refer to the next page for the display.
Each ports on the menu repesets followingconnectors.
COM1(GPS)
COM2(PC)
COM3(NAV1)
COM4(NAV2)
COM5(NSK/COMPASS)
COM6(TXRX)
COM7(KEY BOARD1)
COM8(KEY BOARD2)
Press [0] key.
Press [RADAR MENU] key.
The Main Menu will reappear.
J3 GPS
J8 NMEA
J6 AIS/NMEA
J9 AUX (Option)
J5 GYRO / COMPASS
J2 SCANNER
J4 KEY BOARD
J9 AUX (Optioon)
8 19