JRC JMA-5212-4/6 User Manual page 425

Step 3: Replace the magnetron.
Screws
(4 places)
Cable: yellow
Cable: green
Reverse the order to complete the procedure.
Make sure that all bolts and screws are tightened again, and all cables are properly re-connected.
This completes the magnetron replacement procedure.
8.4 REPLACEMENT OF MAJOR PARTS
Magnetron cover
Screws (4 places)
Magnetron
Screws
(2 places)
8 30
Remove the screws (M4X10, at 4 places) and
remove the magnetron cover.
Remove the screws (M4X12, at 2 places) and
remove the magnetron cable.
Use a shielded screw driver.
Metal (tools) may deteriorate if they
come in contact with the magnetron.
Remove the screws (M4X12, at 4 places) and
remove the magnetron.
Do not lose the removed screws.
Set the new magnetron and cable in place.
yyyy
yyyy
8