JRC JMA-5212-4/6 User Manual page 329

[VI] Radar Interference
When another radar equipment using the same frequency band as that on own ship is near own ship, a
radar interference pattern may appear on the radar display. This interference pattern consists of a number
of spots which appear in various forms. In many cases, these spots do not always appear at the same
places, so that they can be discriminated from the target echoes. (See Figure 6.8.)
HL
If radar equipment causing an interference pattern and this radar are of the same model, their transmitting
repetition frequency is nearly the same.
concentrically.
In this case, the interference patterns cannot be eliminated by using only the interference reflector function,
so press [TX/PRF] several times to fine-tune the transmitting repetition frequency.
An interference suppressing effect can be heightened by applying a different transmitting repetition
frequency to the interference pattern source radar and this radar.
Figure 6.8
As a result, interference patterns may be displayed
6 12
6.4 FALSE ECHOES
HL
yyy
yyy
6