JRC JMA-5212-4/6 User Manual page 431

Step 5: Connect the motor cables.
Step 6: Put the cover on.
Turn on the antenna safety switch.
This completes the motor replacement procedure.
8.4 REPLACEMENT OF MAJOR PARTS
Reconnect the cables to the motor control
power circuit.
Before attaching the cover to the antenna,
make sure that the gasket of the cover is not
deformed or cracked.
Also, remove any dust attached to the gasket.
Fix the cover with 4 hexagon bolts.
Failure to tighten the bolts or loose bolts will
affect waterproof property; therefore, make
sure to tighten all the bolts at the optimal
torque.
8 36
yyyy
yyyy
8