Performance Monitor (Nju-85); Input Enable Signal - JRC JMA-5212-4/6 User Manual

11.11
(1) Dimensions
(2) Mass
(3) Operating frequency
11.12
(1) Navigation equipment:
(2) Bearing signal:
(3) Speed signal:
(4) External event mark:
(5) Depth:
(6) Water temperature:
(7) Tendency:
(8) Direction of wind, velocity of wind:
(9) AIS:
Note: The Speed measuring accuracy of speed sensor shall confirm to IMO Resolution MSC.96(72).
The measuring accuracy of GPS shall confirm to IMO Resolution MSC.112(73).

PERFORMANCE MONITOR (NJU-85)

Height 130mmuWidth 149mmuDepth 70mm
Approx. 1.2kg
9410 ±30MHz

INPUT ENABLE SIGNAL

IEC61162-1/2
Receive port NAV1/NAV2/GPS port
Receive capability sentence.
Longitude/Latitude: GGA>RMC>RMA>GNS/GLL
Waypoint: RMB>BWC(BWR)
COG/SOG: RMC>RMA>VTG
SPEED: VBW
Day/Time information: ZDA
Alarm acknowledge: ACK
Rate of Turn : ROT
Rudder : RSA
GYRO-SYNC: 360X, 180X, 90X, 30X. (Require optional NSK
unit NCT-4106A)
GYRO-STEP: 360X, 180X, 90X, 30X. (Require optional NSK
unit NCT-4106A)
JRC-NSK format (JLR-10, JLR20/30)
IEC61162-2 38400bps: THS>HDT>HDG>HDM>VHW
IEC61162-1: THS>HDT>HDG>HDM>VHW
Can't be use for target tracking.
LOG-SYNC: 360X, 180X,90X, 30X. (Require optional NSK
unit NCT-4106A)
LOG-PULSE: 800, 400, 200, 100. (Require optional NSK unit
NCT-4106A)
Contact input by way of terminal board.
DPT>DBK>DBT>DBS, JRC format
MTW, JRC format
CUR, JRC format
MWV, MWD
IEC61162-2
VDM, VDO (Require optional AIS process unit NQA-2155)
(over 40Hz)
11 13