Deactivating Ais Targets (Deactivate Ais) - JRC JMA-5212-4/6 User Manual

5.3.5 Deactivating AIS Targets (Deactivate AIS)

Deactivate an AIS target
Attention
z The operation above is effective only for active
targets.
Procedure 1 Press the
several times until
The cursor mode is set to the deactivation mode.
2 Move the cross cursor mark onto the active AIS target that is to be
deactivated
The selected AIS target will be deactivated
Press the CURSOR button at the upper right of the radar display
Alternative 1
several times until
The cursor mode is set to the AIS activation mode.
2 Move the cross cursor mark onto the inactive AIS target that is to be
activated
The selected AIS target will be deactivated
*2
For deactivation of targets, refer to "Types and Definitions of AIS Target Symbols" in Section 5.1.2
"Definitions of Symbols."
*2
and clear the display of the vector and HL.
CURSOR button at the upper right of the radar display
CANCEL appears.
*2
, and press [ENT] key.
ACT AIS
*1
, and press [CLR/INFO] key.
5 42
5.3 AIS OPERATION
*2
.
appears.
*2
yy
yyy
5