JRC JMA-5212-4/6 User Manual page 178

[VI] Shifting the display position of navigation information to a correct position
(Shift)
If the display position of navigation information is incorrect, it can be shifted to the correct position in
manual mode.
Procedure 1
2
3
[VII] Shifting the corrected display position of navigation information back to
original (Shift Clear)
Procedure 1
Press [7] key while the User Map
Setting Menu is open.
Shift will appear in the CURSOR mode
field of software button
right corner of the radar display described in
Section 2.3.3, and the navigation information
shift mode is activated.
Use the trackball to move the pointer to
a mark or a point on a NAV line,
coastline, or depth contour line, and
press [ENT] key.
Use the trackball to move the cross
cursor mark to the position to which
the mark or line is shifted, and press
[ENT] key.
All the marks and lines currently displayed will be shifted to their correct positions.
Press [8] key while the User Map
Setting Menu is open.
The MAP returns to the original position.
located at the top
3 99