JRC JMA-5212-4/6 User Manual page 118

[III] Parallel Cursor Start Point Display Mode (Floating)
If this function is set to L/L FIX, and the start point of parallel cursor moves, the start point of the
parallel cursor can be fixed to the latitude/longitude of the start point. If the function is set to
SCREEN FIX,
fixed to the same place on the display even after the own ship moves.
Procedure 1
2
3
* Software button
available for switching.
Note: Setting the function to the L/L Fix mode needs course data and latitude/longitude data.
the start point of parallel cursor is fixed within the radar display, and the start point is
Press [RADAR MENU] key.
Press [3] key.
Press [5] key.
Press [2] key.
The Parallel Cursor Menu will appear.
Press [3] key.
The Floating Setting Menu will appear.
Select the item you want to display,
pressing the numeric keys [1] to [3].
OFF: Floating mode OFF
SCREEN FIX: Fixes the start point of parallel
cursor to the radar display.
L/L FIX: Fixes the parallel cursor with latitude and longitude.
located at the top right corner of the radar display described in Section 2.3.3 is also
3 39