JRC JMA-5212-4/6 User Manual page 11

Hide thumbs Also See for JMA-5212-4/6:
Table of Contents

Advertisement

WARNING
Do not change MBS Level/Area unless absolutely
necessary.
Incorrect adjustment will result in deletion of nearby
target images and thus collisions may occur resulting in
death or serious injuries.
When cleaning the display screen, do not wipe it too
strongly with a dry cloth. Also, do not use gasoline or
thinner to clean the screen. Failure to comply will result
in damage to the screen surface.
Direct exposure to electromagnetic waves at close range
will have adverse effects on the human body. When it is
necessary to get close to the antenna for maintenance or
inspection purposes, make sure to turn the indicator
power switch to "OFF" or "STBY."
Direct exposure to electromagnetic waves at close range
will have adverse effects on the human body.
When conducting maintenance work, make sure to turn
off the power and unplug the power connector J1 of the
radar process unit so that the power supply to the
equipment is completely cut off.
Some equipment components can carry electrical current
even after the power switch is turned off, and conducting
maintenance work without unplugging the power
connector may result in electrocution, equipment failure,
or accidents.
When disposing of used lithium batteries, be sure to
insulate the batteries by attaching a piece of adhesive
tape on the † and { terminals. Failure to comply may
cause heat generation, explosion, or fire when the
batteries get shorted out.
- v -

Advertisement

Table of Contents
loading

Table of Contents