Cursor Modes (Cursor) - JRC JMA-5212-4/6 User Manual

5.1.4 Cursor Modes (Cursor)

Types and Functions of Cursor Modes
The types of cursor modes are listed in the table below. To use the function of a cursor mode, move the cursor
onto the PPI object and press the [ENT] key.
Mode
ACQ TT
ACT AIS
TGT Data
Cancel
Mark
Change of Cursor Mode
Procedure 1
Enables the target tracking function to acquire a target in manual mode.
Activates AIS targets, deactivates AIS target and sets a point filter.
Select or deselect a tracking or AIS target whose numerical data is to be displayed.
Cancels a target tracking.
Puts a temporary mark.
Move the cursor to the cursor mode
located at the top right corner of the radar display described in Section
2.3.3), and press the [ENT] key. On the PPI, press the
[CLR / INFO] key and select a desired cursor mode from the list.
The selected cursor mode will be shown at the cursor mode (software button
at the top right corner of the radar display described in Section 2.3.3).
Function
Cursor
5 13
(software button
located