JRC JMA-5212-4/6 User Manual page 285

Displaying numeric data
Procedure 1 Press the
several times until
The cursor mode is set to the numeric data display mode.
2 Move the cross cursor mark onto the active AIS target for which numeric
data is to be displayed, and press [ENT] key.
The values of the selected AIS target will appear on the right side of the radar display.
The mark
Reference: If the values are displayed but the mark
radar display.
Clearing numeric data
Procedure 1 Press the
times until TGT Data
The cursor mode is set to the numeric data display mode.
2 Move the cross cursor mark onto the active AIS target for which numeric
data is to be cleared, and press [CLR] key.
The values of the selected AIS target will be cleared from the right side of the radar
display, and the mark
CURSOR button at the upper right of the radar display
TGT DATA appears.
is displayed around the symbol.
Cursor button at the upper right of the radar display several
displayed around the symbol will also disappear.
5 44
5.3 AIS OPERATION
. is not on the radar display, the target is outside the
appears.
yy
yyy
5