JRC JMA-5212-4/6 User Manual page 176

[IV] Saving navigation information (Save User Map)
This function is available only when navigation equipment is connected with the system or the own ship's
position is entered in manual mode.
Procedure 1
2
* Each time you press [1] key, the Device item is switched between
INTERNAL and CARD2.
INTERNAL: Saves data in the processor.
CARD2:
To select CARD2, insert the flash memory card, in which data has
been saved, into card slot 2 (upper stage).
3
4
5
Press [4] key while the User Map
Setting Menu is open.
Press [2] key.
The Save User Map Menu will appear.
Saves data in CARD2.
Select the number of the file to be
saved, pressing the numeric key.
The Name Input Menu will appear.
Use the trackball to select an
alphabetic character A-Z or 0-9 shown
in the menu and press [ENT] key on
your required characters.
A maximum of 8 characters can be entered.
Repeat step 4 until the file name to be
saved is created, move the cursor to
ENT , and press [ENT] key.
The currently displayed navigation information
will be saved.
3 97