Display Charts; Insert/Remove A Card - JRC JMA-5212-4/6 User Manual

Hide thumbs Also See for JMA-5212-4/6:

Table of Contents

DISPLAY CHARTS

Insert or remove the JRC coastline ROM card, ERC card, C-MAP card and memory card according to the

procedures below.

Note: Keep a card horizontal when inserting it into a card slot. An inclined card causes a failure.

Do not simultaneously insert a JRC coastline ROM card, an ERC card and C-MAP card into the

card slot. A malfunction will occur on the display.

Insert the card into the specified slot according to the following table:

C-Map NT+ detail card

Note: The Background of C-Map has been built in, don't insert C-Map NT+ background card.

If the background card is inserted, the system will malfunction.

Insert a card into processor unit

Remove the rubber packing located at the front view of the processing

unit cabinet, and expose the card slot.

3.7 DISPLAY CHARTS

Insertion slot No.

Card slot 2 (Upper stage)