7.2.7 Current Correction (SET/DRIFT) Setting
The current set and drift will be set.
z The manually entered speed is effective only when
Procedure
1
2
3
4
5
6
7
8
Attention
"Speed Equipment" is set to "Manual" or "LOG".
Press [RADAR MENU] key twice.
The Main Menu will appear.
Press [7] key.
The NAV Equipment Setting Menu will appear.
Press [6] key.
The Set/Drift Setting Menu will appear.
Press [1] key to enable Correction.
The setting of Correction is switched back and
forth between ON and OFF each time [1] key is
pressed.
Off : Do not perform current correction.
On : Perform current correction.
Press [2] key.
The Code Input Menu will appear.
Enter the direction of tendency.
The direction of tendency will be set. The multi-function control is also available for the
entry.
After having entered the direction, press ENT.
Press [3] key.
The Code Input Menu will appear.
Enter the speed of tendency.
The speed of tendency will be set. The multi-function control is also available for the
entry.
After having enter the value, press ENT.
7 21